EXOCUTIONER SLAM SKID BEHIND AXLE SERVO STUBBY (BAS)
EXOCUTIONER SLAM SKID BEHIND AXLE SERVO STUBBY (BAS)
Couldn't load pickup availability
This SLAM SKID KIT conversion with SLIP SKID technology moves the DLUX OD3 transmission as far forward s possible, this upgrade kit comes with 8mm bolts for transmission, 25mm bolts for the front links, 35mm bolts for rear links and 16mm bolts for front mount into chassis. all bolts go into the skid from the outside now.
In most cases you can reuse the stock rear lower links with some slight adjustment.
This version is for most axles with the servo behind the axle, you must run an outrunner motor like a stubby or snubnose with this setup, A HOLMES 540M may fit, a fusion pro will not fit. You will need a new rear driveshaft, you can get a cheap one with the link below, all you need is 1 for the rear as you can cut an existing one shorter for the front. https://amzn.to/4l1mlJY
This kit comes with
(1) Slam Skid (BAS)
(1) battery tray
(1) set of new lower titanium links (use the angled ends)
(2) 8mm bolts
(2) 16mm bolts
(2) 25mm bolts
(2) 35mm bolts
Share






